Stove & Range Repair in New Haven — Book a Visit Today

Burners clicking but never lighting, or one that stays orange instead of blue. Gas cooktops fail at the igniter, the spark module or a clogged burner port. Electric coils and glass tops usually lose an element or a switch. We test each burner, check the wiring and clean the ports so you get even flame again. Kitchens in New Haven's older housing stock sometimes have gas lines and shutoffs in awkward spots, and we handle that carefully. If you smell gas, shut the valve and step outside. Then dial us or send the quote form.

Real person answers
Open 7 days
Written quotes

Call (888) 826-9217

A real person answers
Open 7 days
Written quote before work starts

Taking calls until 5:00 PM ET

Stove & Range Repair technician in New Haven, CT

Common stove & range faults in New Haven homes

Burner clicks and clicks but never lights Spark igniter or ignition module — usually moisture in the switch or a cracked electrode.
Oven runs way too hot on one side Failing temperature sensor, bad calibration, or a bake element burning unevenly.
I smell gas near the stove Loose fitting, worn valve stem, or a leaking supply line — shut the gas off and call.
Front burner won't turn down past high Worn infinite switch on electric, or a clogged orifice and bad valve on gas.
Oven door won't latch during self-clean Door lock motor, warped hinges, or a stretched door spring holding the seal open.

New Haven coverage

We cover 06510, 06511 and 06513 in the city, plus West Haven, East Haven, Hamden and Branford just up the road.

Other repairs we do in New Haven

All stove & range repair → · All New Haven services →

Stove & Range Repair in New Haven — quick answers

Do you work on both gas and electric ranges?

Both, plus dual-fuel and induction. Gas work means igniters, valves, orifices and safety valves. Electric means elements, infinite switches and relay boards. Induction means coils and power modules. Tell us which you have when you call us.

My oven bakes cold. Is that fixable or is it the whole stove?

Almost always a part, not the appliance. A drifting temperature sensor is the usual culprit, sometimes the control board or a cracked element. We test the sensor's resistance cold, so the diagnosis isn't guesswork.

One burner is dead but the rest work. Worth a service call?

Yes, and it's usually a small repair. On gas that points at one igniter or a blocked orifice. On electric it's often the element or its receptacle. Isolated failures are simpler than whole-range problems.

Can you get to a range in a tight galley kitchen?

That's most of the homes we visit. Rowhouses and walk-ups don't leave much clearance. We protect the floor, walk the range out carefully, and check for a gas shutoff before anything moves.

How soon can you get to my New Haven house?

Call us and we'll give you the next open windows, usually within a day or two. Morning slots go quickly downtown, so book early if you need one. If parking is metered or permit-only on your block, say so when you schedule and the tech will plan for it.

How it works

Step 1
Tell us the symptom
Call us or fill out the form. Describe what you hear, smell or see. Brand and rough age help. We ask a few questions so the tech arrives with likely parts on the truck.
Step 2
We come look
Pick a window that works. Our tech tests the machine, checks power, water and drainage, then explains what failed in plain words. No jargon, no guessing out loud at your kitchen table.
Step 3
Repair or straight answer
Most jobs finish the same visit. If a part must be ordered, we tell you what and why. If the unit isn't worth fixing, we say that too, and you decide.

Call (888) 826-9217

A real person answers
Open 7 days
Written quote before work starts

Questions worth asking any repair company

Ask these of anyone you let into your home — us included. Call and we'll answer all five before you book anything.

1Ask for their license numberThen verify it with your state licensing board rather than taking it on trust.
2Ask for proof of insuranceLiability cover protects you if something goes wrong in your home.
3Get the quote in writingIncluding the trip fee, whether it's credited against the repair, and parts.
4Ask how they handle callbacksIf the same fault returns, what happens? Get the answer before work begins.
5Check their own reviewsLook the business up independently — their Google profile, not just what they tell you.

Why homeowners call us

Old houses don't scare usRowhouse kitchens, narrow cellar stairs, stacked units jammed in closets. We've pulled machines through doorways built before these appliances existed. We protect floors and trim, and we put everything back where it stood.
Symptom-first diagnosisA dryer that runs cold and a dryer that trips the breaker are different problems. We test before we replace. That keeps us from swapping good parts and handing you a bill for nothing.
Independent, not a brand agentWe repair all major brands but answer to no manufacturer. That means we recommend the fix that makes sense for your machine and your budget, including telling you when replacement is the smarter move.
Wide service map, local habitsFourteen Northeastern states, dispatched with Connecticut manners. We call before we arrive, wear covers indoors, and clean up the water, lint and packaging before we head out the door.
All major brands, gas & electricWhirlpool, Samsung, LG, GE, Maytag, Bosch, KitchenAid and more — as an independent repair company.
Straight answersIf it isn't worth repairing, we'll say so — often on the phone.