Dishwasher Repair in Newton — Book a Visit Today

Glasses come out gritty. There's a puddle under the front edge. The soap cup is still full at the end of the cycle. Each of those points somewhere different — spray arm, wash motor, door gasket, or a detergent dispenser that stopped opening. We diagnose first, then repair. All major dishwasher brands, no factory affiliation, just competent hands. Newton kitchen remodels often set the unit tight against stone counters, so we ease it out without cracking anything. Standing water gets smelly fast. Call us and we'll get you on the schedule.

Real person answers
Open 7 days
Written quotes

Call (888) 826-9217

A real person answers
Open 7 days
Written quote before work starts

Taking calls until 5:00 PM ET

Dishwasher Repair technician in Newton, MA

Common dishwasher faults in Newton homes

There's water sitting in the bottom every morning Drain pump, clogged sump filter, or a kinked or high-looped drain hose
Dishes come out with grit and film still on them Weak wash pressure, blocked spray arm jets, or low fill from the inlet valve
Water is seeping onto the kitchen floor mid-cycle Failed door gasket, cracked sump seal, or a loose hose clamp under the tub
It hums, then quits without filling Stuck inlet valve, closed supply shutoff, or a float switch reading full
Buttons light up but nothing starts Door latch switch, control board fault, or a stored error locking the cycle out

Newton coverage

From Newton we also cover Watertown, Waltham, Brighton and Brookline, plus surrounding ZIPs including 01760, 01778 and 01801.

Other repairs we do in Newton

All dishwasher repair → · All Newton services →

Dishwasher Repair in Newton — quick answers

Why does my dishwasher smell sour even when it's empty?

Trapped food in the sump and a greasy filter cause most of it. A biofilm can also build inside the drain hose. Clean the filter, run a hot empty cycle. If the smell returns quickly, the sump or hose likely needs attention.

Is a dishwasher that won't drain always the pump?

No. We check the filter, sump, air gap, disposal inlet and drain hose loop first. A blockage anywhere in that path mimics a dead pump. Testing the pump for continuity and free rotation tells us which repair is actually needed.

Can you work on a dishwasher built into old cabinets?

Yes. Tight cutouts, thick countertop overhangs and short supply lines are normal in older housing stock. We pull the unit carefully, protect the flooring, and reset it level so the door seals and latches the way it should.

How long does a typical repair take?

Many jobs finish in one visit once we've confirmed the fault. Diagnosis usually takes a portion of an hour, then the repair depends on the part. If something uncommon has to be ordered, we tell you before we leave.

How soon can someone get to my house in Newton?

Call us and we'll give you the next open window, often within a day or two. Morning and afternoon blocks are available. If your street parking is permit-only or the driveway is short, say so when you book so the tech plans for it.

How it works

Step 1
Tell us the symptom
Call us or fill out the form. Describe what you hear, smell or see. Brand and rough age help. We ask a few questions so the tech arrives with likely parts on the truck.
Step 2
We come look
Pick a window that works. Our tech tests the machine, checks power, water and drainage, then explains what failed in plain words. No jargon, no guessing out loud at your kitchen table.
Step 3
Repair or straight answer
Most jobs finish the same visit. If a part must be ordered, we tell you what and why. If the unit isn't worth fixing, we say that too, and you decide.

Call (888) 826-9217

A real person answers
Open 7 days
Written quote before work starts

Questions worth asking any repair company

Ask these of anyone you let into your home — us included. Call and we'll answer all five before you book anything.

1Ask for their license numberThen verify it with your state licensing board rather than taking it on trust.
2Ask for proof of insuranceLiability cover protects you if something goes wrong in your home.
3Get the quote in writingIncluding the trip fee, whether it's credited against the repair, and parts.
4Ask how they handle callbacksIf the same fault returns, what happens? Get the answer before work begins.
5Check their own reviewsLook the business up independently — their Google profile, not just what they tell you.

Why homeowners call us

Old houses don't scare usRowhouse kitchens, narrow cellar stairs, stacked units jammed in closets. We've pulled machines through doorways built before these appliances existed. We protect floors and trim, and we put everything back where it stood.
Symptom-first diagnosisA dryer that runs cold and a dryer that trips the breaker are different problems. We test before we replace. That keeps us from swapping good parts and handing you a bill for nothing.
Independent, not a brand agentWe repair all major brands but answer to no manufacturer. That means we recommend the fix that makes sense for your machine and your budget, including telling you when replacement is the smarter move.
Wide service map, local habitsFourteen Northeastern states, dispatched with Connecticut manners. We call before we arrive, wear covers indoors, and clean up the water, lint and packaging before we head out the door.
All major brands, gas & electricWhirlpool, Samsung, LG, GE, Maytag, Bosch, KitchenAid and more — as an independent repair company.
Straight answersIf it isn't worth repairing, we'll say so — often on the phone.