Dryer Repair in Yonkers — Book a Visit Today

Three cycles and the towels are still damp. That's usually heat, not time. A failed element, a tripped thermal fuse, a bad thermostat, or airflow so restricted the machine cooks itself and shuts down. We also see drums that tumble with a scraping sound — rollers or a worn belt. Yonkers apartments and walk-ups often vent through long runs to an outside wall, and that matters to the diagnosis, so we check it. Gas or electric, every major brand, independent work. Ring us with the make and model, or use the quote form and we'll reach out.

Real person answers
Open 7 days
Written quotes

Call (888) 826-9217

A real person answers
Open 7 days
Written quote before work starts

Taking calls until 5:00 PM ET

Common dryer faults in Yonkers homes

"It runs but clothes come out wet" No heat: blown thermal fuse, failed heating element, bad thermostat, or a choked vent line
"Something's screeching in there" Worn drum rollers, a dry idler pulley, or a bearing gone rough at the rear of the drum
"The drum won't spin at all" Snapped drive belt, seized pulley, or a motor that hums and stalls
"It shuts off after ten minutes" Overheating from restricted airflow, or a moisture sensor and control board reading wrong
"Won't start when I press the button" Door switch, start switch, thermal fuse open, or no power reaching the control

Yonkers coverage

From Yonkers we cover 10451, 10453, 10457 and 10460, plus Mount Vernon, New Rochelle and Greenburgh.

Other repairs we do in Yonkers

All dryer repair → · All Yonkers services →

Dryer Repair in Yonkers — quick answers

Why is my dryer taking three cycles to dry one load?

Almost always airflow. Lint collects in the duct, the hood flap sticks, or a crushed flex hose behind the machine strangles exhaust. Heat builds, the dryer cycles off early, and clothes stay damp. We check the whole run, not just the screen.

Is a burning smell an emergency?

Treat it that way. Stop the dryer, unplug it or shut the gas valve, and don't run it again. Scorched lint near the element or a failing motor both smell like that. Call us and we'll talk through what you're smelling.

Do you work on gas dryers as well as electric?

Yes. Gas units add igniters, flame sensors and gas valve coils to the list of parts that fail. Electric units come down to elements, fuses and thermostats. We diagnose both, and we handle stacked and side-by-side setups.

My dryer is twelve years old. Worth fixing?

Often, yes. Belts, rollers, fuses and elements are ordinary wear parts on a cabinet that's otherwise sound. If the drum is cracked or the bulkhead is rusted through, we say so plainly and you decide.

How soon can someone get to my Yonkers place?

Most weeks we can offer a same-week window, and often next-day if your street falls on a route we're already running. Call us with your ZIP and the symptom. If the machine is leaking onto a floor, say so — those get moved up.

How it works

Step 1
Tell us the symptom
Call us or fill out the form. Describe what you hear, smell or see. Brand and rough age help. We ask a few questions so the tech arrives with likely parts on the truck.
Step 2
We come look
Pick a window that works. Our tech tests the machine, checks power, water and drainage, then explains what failed in plain words. No jargon, no guessing out loud at your kitchen table.
Step 3
Repair or straight answer
Most jobs finish the same visit. If a part must be ordered, we tell you what and why. If the unit isn't worth fixing, we say that too, and you decide.

Call (888) 826-9217

A real person answers
Open 7 days
Written quote before work starts

Questions worth asking any repair company

Ask these of anyone you let into your home — us included. Call and we'll answer all five before you book anything.

1Ask for their license numberThen verify it with your state licensing board rather than taking it on trust.
2Ask for proof of insuranceLiability cover protects you if something goes wrong in your home.
3Get the quote in writingIncluding the trip fee, whether it's credited against the repair, and parts.
4Ask how they handle callbacksIf the same fault returns, what happens? Get the answer before work begins.
5Check their own reviewsLook the business up independently — their Google profile, not just what they tell you.

Why homeowners call us

Old houses don't scare usRowhouse kitchens, narrow cellar stairs, stacked units jammed in closets. We've pulled machines through doorways built before these appliances existed. We protect floors and trim, and we put everything back where it stood.
Symptom-first diagnosisA dryer that runs cold and a dryer that trips the breaker are different problems. We test before we replace. That keeps us from swapping good parts and handing you a bill for nothing.
Independent, not a brand agentWe repair all major brands but answer to no manufacturer. That means we recommend the fix that makes sense for your machine and your budget, including telling you when replacement is the smarter move.
Wide service map, local habitsFourteen Northeastern states, dispatched with Connecticut manners. We call before we arrive, wear covers indoors, and clean up the water, lint and packaging before we head out the door.
All major brands, gas & electricWhirlpool, Samsung, LG, GE, Maytag, Bosch, KitchenAid and more — as an independent repair company.
Straight answersIf it isn't worth repairing, we'll say so — often on the phone.